PVC-U RAINWATER SOLVENT CEMENT
Solvent cement is a formulated premium quality liquid adhesive which is used to create an airtight seal that holds PVC-U pipe and fittings together. Our solvent cement features strong bonding strength, fast-dry, slow-dry and waterproof seal. It is safe for drinking-water supply piping, sanitary pipes, water irrigation and etc. All of our solvent cement has been certified by Sirim QAS International in compliance with MS 628-4:2015. (equivalent to British Standard BS 4346 Part 3)
- A highly soluble FAST DRY and SLOW DRY PVC-U Solvent cement is available.
- When applied, it will instantly dissolve and blend with the pipe to produce a film (wall) of 0.4mm thick, so that the fitting gap will be strong and stable.
RECOMMENDATIONS ON BRUSH :-
A : Pipes with diameter 25mm (1”) and below - recommended brush are provided with the can.
B : Pipes with diameter 32mm to 50mm (11/4” to 2”) - use 1” brush
C : Pipes with diameter 75mm to 200mm (3” to 8” and above) - use 2” brush
PRESSURE TEST
Cold Water (20°C)
Hot Water (60°C)
TEST PRESSURE
Below 12kg/cm²(171psi)
Below 12kg/cm²(171psi)
DRYING TIME
After 1 hour
After 2 hour
ESTIMATED SOLVENT CEMENT REQUIREMENT:-
PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Clear Flash Point: 15°C DG Class: 3.2
Flammable Mixture (UN No. 1133)
This solvent cement material will ignite at ambient temperatures. Colourless vapors may travel considerable distance to ignition sources and cause flash fires or explosions.
HAZARD IDENTIFICATION
May cause eyes and skin irritation, burns or dermatitis.
STORAGE
Store in well-ventilated area. Keep away from heat, sparks and flame.
SAFETY PHASE
• Keep away from sources of ignition - No-Smoking.
• Avoid contact with eyes.
• In case of fire, use chemical powder, foam or carbon dioxide.