POLYVINYL CHLORIDE (PVC) SOLVENT CEMENT
CS solvent cement is a formulated quality liquid adhesive which is used to create an airtight seal that holds PVC-U pipe and
fittings together. Our solvent cement features strong bonding strength, fast-dry, slow-dry and waterproof seal. It is safe for
drinking-water supply piping, sanitary pipes, water irrigation and etc. All of our solvent cement has been certified by Sirim
QAS International in compliance with MS 628-4:2015. (equivalent to British Standard BS 4346 Part 3)
♦ A highly soluble FAST DRY and SLOW DRY PVC-U Solvent cement is available.
♦ When applied, it will instantly dissolve and blend with the pipe to produce a film (wall) of 0.4mm thick, so that the fitting gap will be strong and stable.
RECOMMENDATIONS ON BRUSH :-
A: Pipes with diameter 25mm (1") and below - recommended brush are provided with the can.
B: Pipes with diameter 32mm to 50mm (11/4" to 2") - use 1" brush
C: Pipes with diameter 75mm to 200mm (3" to 8" and above) - use 2" brush
| PRESSURE TEST | TEST PRESSURE | DRYING TIME |
| Cold Water (20°C) | Below 12kg/cm²(171psi) | After 1 hour |
| Hot Water (60°C) | Below 12kg/cm²(171psi) | After 2 hour |
MATERIAL SAFETY DATA SHEET
COMPOSITION/INFORMATION ON INGREDIENT:
| Ingredient | PVC Resin | Cyclohexanone | Methyl Isobuty Ketone (MIBK) | T.H.F. | Methyl Ethynl Keltone (MEK) |
| CAS No. | 9003-22-9 | 108-94-1 | 141-79-7 | 109-99-9 | 78-93-3 |
| %-volume | 24% | 30% | 11% | 4% | 55% |
Appearance : Clear Flash Point: 15°C DG Class: 3.2
Store in well-ventilated area. Keep away from heat, sparks and flame.
This solvent cement material will ignite at ambient temperatures.
Colourless vapors may travel considerable distance to ignition
sources and cause flash fires or explosions.
♦ Keep away from sources of ignition - No-Smoking.
♦ Avoid contact with eyes.
♦ In case of fire, use chemical powder, foam or carbon dioxide.
May cause eyes and skin irritation, burns or dermatitis.